Refrigerant Dryers

Most CEA customers have pneumatic tools and equipment inside a climate-controlled building; this is where refrigerant dryers shine.

These units consume minimal energy and almost no air, making them a cost-effective and environmentally friendly choice. Air is dried to a pressure dew point of ~4°C, providing a system that’s ideal for indoor applications.

CEA offers CRN-approved refrigerant dryers from 10 to 5,000 CFM.
Contact Us
Right Arrow Icon
Refrigerant Dryer
Regenerative Desiccant Dryers (Twin Towers)

Regenerative Desiccant Dryers (Twin Towers)

Commonly used outdoors and where ambient temperatures reach well below freezing, the dryer’s familiar ‘twin towers’ are filled with desiccant beads (i.e. activated alumina). As compressed air passes through the highly porous spheres, they draw in and retain any moisture.

Drying cold outdoor air to pressure dew points of -40 to -100°C will prevent freezing and keep your tools and equipment running longer.

CEA offers regenerative dryers from 10 to 6000 CFM (with available CRN).
Contact Us
Right Arrow Icon

Deliquescent Dryers
(Single Tower)

“Deli dryers” are often used as a pressure dew point depressant in the sandblasting industry. These devices can lower the output pressure dew point by approximately 30°C compared to the inlet temperature.

These systems consume very little air and will operate indefinitely with regular topping up of the deliquescent bed.

CEA offers units that handle airflow up to 16,000 CFM.
Contact Us
Right Arrow Icon
Deliquescent Dryers (Single Tower)
Membrane Dryers

Membrane Dryers

These are great for smaller ‘point-of-use’ drying applications. They require no energy source and can be installed almost anywhere indoors. Using Hollow Fiber Membrane Technology, membrane dryers are compact, lightweight, and have no moving parts.

CEA offers 40 CFM units at 0°C pressure dew point, and 10 CFM at -40°C.
Contact Us
Right Arrow Icon

Your ‘one-stop shop’ for air compression, distribution, and usage.

Compressed
Air

Right Arrow Icon

Motion &
Control

Right Arrow Icon
Custom Energized Air Ltd. is a subsidiary of Carmela Industries Inc.

Explore

Products
Service
oUR pARTNERS
aBOUT uS
Contact Us

Contact Us

Edmonton (Head office)9555 - 62 Avenue NW
Edmonton, AB  T6E 0E1
780-465-2247
rED DEER OFFICE2, 7679 Edgar Industrial Court
Red Deer, AB  T4P 4E2
403-348-5567
sales@customenergizedair.com
Copyright 2024 - CUSTOM ENERGIZED AIR Ltd.